Caring for your new floor
Vacuum regularly to remove gritty dirt that can damage the fibres. Deal with spillages immediately, using towels or kitchen roll to remove excess fluid – then, treat the remaining stain. For woollen carpets we recommend that you use cleaning products with the Woolsafe logo on.
Sweep or vacuum regularly (avoid a vacuum with a beater bar as it can cause damage) as dust and sand can damage your vinyl. Mop with warm water; then rinse with freshwater. Some products may be used, but always read the manufacturer’s instructions before use.
Sweep the floor regularly to remove dust or debris. For small spillages, use a soft cloth as soon as possible after it occurs. For regular cleaning, use a micro-fibre mop and a recommended laminate flooring cleaner.
Sweep, mop or vacuum with a lightweight vacuum clean often, as small amounts of grit or dirt can cause minor scratches that build up over time. Too much water makes wood swell so always squeeze your mop out thoroughly. Wood can fade if exposed to bright sunlight, so avoid this by closing curtains or blinds or placing mats in the vulnerable areas. If you need to use a floor cleaner, make sure it is an accredited lacquer floor cleaner.
Luxury Vinyl tiles
Luxury vinyl tiles will not split, chip, crack or splinter and they are one of the hardest wearing flooring products available and one of the easiest to maintain. Mop them with warmwater and a splash of vinyl tile cleaner.
|Office||: 01487 812825|
|Matthew||: 07871 277244|